top of page
Filament Wound Tubes
<=1500mm in diameter
<=3000mm in length
Practically any profile of uniform cross section can be produced up to 400mm wide and 200mm high, with a minimum wall thickness of 2.5mm. Also since it is a continuous process, the length is practically unlimited, constrained only by transportation options.
Custom profiles can be produced according to customer specification; however the following guidelines should be kept in mind.
Max width = 400mm, Height = 200mm, Min Thickness = 2.5mm
Max Thickness for Hollow Sections = 12mm
Minimum Radius = 1mm
bottom of page